Riverhawk tensioners hydraulically stretch the Riverhawk supplied studs to achieve a repeatable, uniform clamping pressure required for trouble free acceptance testing. The reduction in labor and test hours equates to on time deliveries and start ups. Riverhawk tensioners solved the problem of leakage paths caused by the traditional torquing methods and multi-jackbolt torquenuts of common tensioners.
|
 |
- Modular Design Grants Flexibility
- Precise and Repeatable Stud Loading
- Quick and Easy Flange Closure
- more...
|
| |
|
 |
- One of a Kind Metal to Metal Seal Design
- Harsh environment tolerance
- Tolerates applications over 500°F
- Charges with water for special applications
- Multibolt Tensioning
- Simultaneous "Daisy Chaining" provides consistent clamp loads and shorter set-up time
- Compact Standard Sizes
- Accommodates confined spaces and envelope restrictions
- more...
|
| |
|
 |
- High Temperature Capability
- Easily Retrofittable
- Simultaneous Tensioning Capability
- more...
|
| |
|
 |
- Retrofittable
- Retrofit for Torqued to Tensioning without replacing studs
- Standard radial footprint as existing nut
- Individual installation & removal
- Substitutes existing 12 point, hex, and cap nuts as well as others
- No Extended Stud Thread Required
- Utilizes the OD of the nut for tensioner gripping surface
- Easy Installation
- Utilized with an External Tensioner (HET) that is removed once tensioning is complete
- more...
|
| |
|
 |
- Dual Pump Configuration
- Skid mounted light weight frame (45 lbs)
- Interchangeable 10 Ft. flexible hoses
- 10,000 psi, and 40,000 psi pumps & gauges
- ISO Grade 32 hydraulic oil
- Pressure tested to full capability
- Single Pump Configuration
- Base Mounted 21,750 psi Pump & Gauge
- Supplied with 10 ft. Flexible Hose
- Flexible Hose
- Eliminates Hard Couple Tubing
- more...
|
| |
|
 |
- Instant, and Reliable Hydraulic Power
- Proficient, Compact, Moveable (55 lbs)
- Economical - Decreases Downtime and Labor Hours
- Flexible Hose Fittings
- Swivel Connections / Fittings
- Inlet Air Supply
- more...
|
| |
|
 |
- Flexible hose materials easier to use than traditional hard piping
- Available in different lengths. (Standard length is 10 ft.)
- Burst pressure is 2.5 times rated or working pressure
- more...
|
| |
